Fans

Dospel offers wide range of fans. Specify your needs and choose between domestic fans designed to raise your living comfort or industrial fans, which will have huge impact in supporting most of any production facility.

  1. VISCONTI SATIN Ø100 domestic axial fan

    VISCONTI SATIN Ø100 domestic axial fan

    Starting at: €21.05

    It's a recent addition to the range. Available as standard, with a timer and with a humidistat timer.

    StandardWCH-timer,humidistat Instruction

    Learn More
  2. EURO 0D Ø150 centrifugal roof fan

    EURO 0D Ø150 centrifugal roof fan

    €143.67

    The EURO 0D roof top fan provides an updraft for ventilation systems. The fan motor is equipped with ball bearings, the casing is ABS plastic providing protection from adverse weather conditions.

    Roof Fan

    Duct Fan Instruction

    Learn More
  3. centrifugal chimney fan fireplace round air ducts

    KOM III by-pass centrifugal chimney fan

    Starting at: €205.56

    KOM warm air distributor is a part of the fireplace heating system. It can transport warm air of up to 150°C to the heated rooms. High pumping pressure balances the pressure drop in the installation ducts, allowing distribution of warm air to several rooms at the same time. KOM fans do not require frequent and detailed inspections*. They are adapted to continuous work, in the temperatures from -20°C to +150°C. Smoothly adjustable KOM fan activation threshold temperature enables temperature in the rooms to meet the user's individual requirements. KOM's have a possibility of cooperation with a circuit, allowing change of the fan rotation speed.

    Chimney Fan Instruction

    Learn More
  4. centrifugal chimney fan fireplace round air ducts

    KOM II centrifugal chimney fan

    Starting at: €147.81

    KOM fireplace fans are designed to transmit hot air through the system of ducts from the fireplace to other rooms. It increases the efficiency of using fireplace heat nad reduces costs of heating the rooms. The casing is made of galvanized steel. The fan is equipped with thermostat with range of 25 - 90 C.

    Chimney Fan Instruction

    Learn More
  5. centrifugal duct fan inline Industrial

    EURO 0 Ø150/160 centrifugal duct fan

    €106.83

    It is used to increase the aur flow inside a network of ventilation ducts. The EURO 0 inline fan is equipped with ball bearing and a visible propeller with a protective grate, the casing is ABS plastic. The installations can be mounted horizontally and vertically.

    Duct Fan Instruction

    Learn More
  6. duct axial fan ventilation in-line tube

    TURBO duct axial fan

    Starting at: €54.84

    Turbo duct fans are available in versions with two-speed motor. They can work in high or low gear, depending on what efficiency is required. The advantages of TURBO fans include a low noise level, high efficiency and small dimensions.

    Duct Fan Instruction

    Learn More
  7. duct axial fan ventilation in-line tube steel

    WB duct axial fan

    Starting at: €27.84

    It is used to transmit and strengthen the air flow inside a network of ventilation ducts. The casing is made of galvanized steel. The fan is equipped with slide bearings.

    Duct Fan Instruction

    Learn More
  8. duct axial fan ventilation in-line tube

    EURO 1, 2 & 3 duct axial fans

    Starting at: €8.47

    EURO axial fans are designed to move air within ducts and is fitted within the circular ducts.

    Duct Fan Instruction

    Learn More
  9. duct axial fan ventilation in-line tube

    POLO 1 & 2 duct axial fan

    Starting at: €14.42

    The POLO 1 and POLO 2 are designed to move low to medium air flows short distances. They are installed outside the duct and have fastening points to fix the fan and the adjoining ductwork by screws. The POLO fan is connected to circular ventilation ducts with dimensions either side of the POLO fan at 104 and 100 mm or 125 and 129 mm to enable connectivity with the duct system. The dimensions of the POLO duct fans (100/104 and 125/129) enable connectivity with ventilation grills, ducting and flex's as integral parts of ducting systems.

    Duct Fan Instruction

    Learn More
  10. WOKS industrial axial fan

    WOKS industrial axial fan

    Starting at: €117.88

    WOKS fans have a synchronous motor, ball bearings and a visable propeller with a protective grill. The ball bearings ensure a quiet long operational time of the fan. They enable the installations to be mounted both horizontally and verically. They are used to ventilate manufacturing rooms, plants, warehouses, sport centres. The volumetric efficiency range for the fans is from 890 to 5700 m3/h. All WOKS fans are manufactured with powder coated metal propellers.

    Industrial Instruction

    Learn More